![]() |
唉,我的柯达800II的激光器坏了
唉,我的柯达800II的激光器坏了,我不想找柯达修太贵了,有没有哪位大侠知道哪位会修。
|
激光头坏了好像没得修的吧 只能换吧, 但是能不能调数据再用这就要柯达的人看看才知吧
另外 你怎样知道是激光器坏了?报什么错误码啊 |
你能描述一下你的目前设备故障的现象吗?你是如何知道是激光器坏了的原因呢?
|
修肯定是能修的,只是没人会,但是柯达有卖就激光头的。
|
报错
break detected,exposure head hasreset
|
你好,
我在網上找到一些資料,希望對你有幫助。 Davidovi Junior Member Join Date: Aug 2008 Posts: 1 Check cables on the back of the head, maybe is some bad contact. If you still have problems, you can contact us and we can repairt it with warranty Oscar Ramirez Junior Member Join Date: Jan 2009 Posts: 4 These are some of the possiblle issues wth the head; -Exposure head reset with "head reset" command -Faulty EH-BP (exposure head to backplane) cable -Exposure head digital board faulty or not mounted correctly -Faulty head -Exposure head crashed or reset due to head firmware bug -Faulty power supply (low +/-12V). -Head firmware or LCA bundle not loaded completely, or corrupted. Iam guessing you don't have a service contract, if not at least call in for remote support to check the head, hope fully its just a cable. 謝謝。 愛花的女人上 我喜愛花,可否給我鮮愛花。嘻嘻! |
柯达的ctp不只一个激光头啊!坏一个两个还能用的啊
|
建议你抓紧时间要工程师上门检查,以便用最短的时间去解决问题
|
故障的现象先说说.才能知道你的问题出在那里的?
|
楼主恭喜啊,又二,三十万没有啦。谁让你选择柯达呢?
|
引用:
|
據说柯达的机器,激光头部分有自毁装置,外人修的话估计不行!为的就是防止别人拆开来研究,在保修器内应该都是直接换新的~:big_smile:
|
大家一起来厂家一下,看看怎么做,才能让柯达激光器价格降下来,这对大家都有好处的。
|
求柯达激光器维修教程
求柯达激光器维修教程,大家将柯达工程来维修过程中一些认识,写成教程,供广大有柯达CTP的同仁降低成本,更好服务社会。
|
引用:
|
| 所有时间均为 +8, 现在的时间是 2025-12-03 13:01. |
Powered by vBulletin® Version 3.8.12 by vBS
Copyright ©2000 - 2025, vBulletin Solutions, Inc.