网点扩大的PPT讲议
 

[隐藏内容]

没有多少新知识，但提出的视觉性网点增大确实第一次听说。不知道视觉性网点增大是如何评估呢？或者是现在的测量色表的方式得到的网点增大已经包括了。

I don't think optical dot gain is something new or no one bring it out in this forum before. There should be many members know about what caused the dot gain.
Attached a pdf, which was posted (by me) in March in one the thread, that was summary of the dot gain explanation published in one of the magazine in late '90.
Franky to said that the ppt content is nothing special. Nowadays density is using more in process control instead of as a printing standard.

:amazing:我们当年学网点扩大的时候就已经讲过网点扩大包含光学扩大和物理扩大了，这个不是什么新观点了。
我好奇的是爱色丽的测试设备测量的网点扩大时基于密度的，但是好像这个网点扩大分成光学扩大和物理扩大来看这个测试扩大值又太小了~像这类测试设备又是如何平衡这两者之间的关系呢？

已经包括了，所以如果在前端进行补偿，要适当减去光学网点增大部分。

Density is a measure of the percentage of reflected light. In printing processes, this usually means the percentage of light that is reflected from the substrate and the ink.
Density = log10 1/Reflectance factor
The Murray-Davies formula for calculating dot gain (the most common method used in densitometers) includes a factor for optical dot gain.
In the 1930s, Murray - the first measurement of dot gain, who related the three quantities—dot area (A), density of the tint (Dt), and solid density (Ds)—in the following equation, known as the Murray-Davies Equation: A = (1-10-Dt) / (1-10-Ds)

刪除你的帖子是因為你的資料不能在同一區內重覆發表，請閣下看一下論壇規則，切勿在此誤導人家！:gloatingly_smile:

別以為自己看了這個資料就覺得要減去光學網點增大部份就是對的！網點在紙張生成後，最後都是用會被人眼去觀看去感覺，加上這光學網點增大部份有何不對？若然你所發表的理論是值得去推介，那麼為何沒有人去做？儀器上沒有這功能去扣減？那只證明這理論是閣下一相情願地去想吧？:scorn:

还真缺这方面的知识好好学习一下谢谢楼主

看看讲的仔细不？还记得老师讲的网点扩大规律。对不同网点形状有不同的影响。