trendsetter 800-Ⅲ系列CTP报40670错误如何解决?
 

trendsetter 800-Ⅲ系列CTP报40670错误如何解决?

这个报错是指版夹移位，麻烦你检查一下版夹状况

Error Number: 40670
Error Message: MDH: Please move clamps to park position, then select RESUME

Operator Action:
Remove plate from drum if necessary, then move clamps to park position, then select RESUME

Service Information:
The clamps have been detected on the drum during an engine initialization. This error will be displayed asking the operator to move the clamps to the park position then select RESUME to continue.

Cause:
Clamps left on drum after failed load/unload

Sensor 感应不到版尾夹 或者感应到飞版
如果滚筒上有版请把它排除, 然后把版尾夹放到park的位置按 “Resume”

这个问题你将版尾夹调下，然后将滚筒及检测条清洁下，因就好了