Canon 9410有刷线的问题
 

我公司的机器，用onyx 12的软件
选择 2400*1200分辨率
还是会出现刷线
该如何解决呢??

印出来好粗糙呀，用PS试试,我们公司旧的佳能机器都没这种问题

You should be able to lower the resolution BUT print 'Uni-directional'. That will usually help the banding and keep the speed reasonable. Printing High Resolution AND Uni-directional is REALLY slow (If that concerns you).
The only other option is to try selecting a different, but similar Paper Type and see if that helps.


I assume you have already printed a nozzle test and that was clean.... I hope you did. Else you would need to do a 'Head Cleaning A', under Maintenance. Don't run the Head Cleaning B, it's just a waste of ink. And don't do more that 2 Head Cleanings at one time. It can over heat the Heads and cause more problems.

新机器吗？ 把喷头调高点行不行 还是机器用太久了 喷头寿命到了

我的A4机打印机新买来也是这样，打白墨一一条条纹路很清晰，是机器有问题吗

做一下进纸调整应该可以改善..打印质量--手动.--卷纸1.会自动打印调整图.

明显的进纸步进问题，重新按照当前介质调整机器参数

清洗一下喷头，加大一些墨量~我打菲林有时候对着光照看，也能看到这个问题。如果以上不行。喷头就快挂了~

打印机步进调整，步进小了，打出来会有黑线，步进大了，打印出来会有白线，做下进纸调整就好了，还有你这个打出来的图颗粒感是不是有点重啊

打菲林有这种现象跟墨水关系很大的

喷头校正有问题，在机器里校正下打印头吧。

谢谢大家的意见
最近比较忙
会试试看大家的建议
谢谢