Error Number: 40670
Error Message: MDH: Please move clamps to park position, then select RESUME
Operator Action:
Remove plate from drum if necessary, then move clamps to park position, then select RESUME
Service Information:
The clamps have been detected on the drum during an engine initialization. This error will be displayed asking the operator to move the clamps to the park position then select RESUME to continue.
Cause:
Clamps left on drum after failed load/unload
Sensor 感应不到版尾夹 或者感应到飞版
如果滚筒上有版请把它排除, 然后把版尾夹放到park的位置按 “Resume”