10-105指的是定影出口传感器检测到卡纸，从你的描述来看，貌似电路驱动力不足或者电路缺相
10-105 Fuser Exit Sensor On Jam RAP
Description
The Fuser Exit Sensor did not actuate within the specified time after the V-Tra Sensor 2 deactuated.
Initial Action
Refer to BSD 10.9 for the following procedure.
Check for the following:
Clean the Fuser Exit Sensor ( PL 8.6)
The Fuser Belt is not torn or contaminated with Fuser Oil ( REP 10.4)
Obstructions in the Vacuum Transport paper path or damage on lead edge of sheets
The motor, belts and gears of the V-Tra 1 and 2 for damage, binding or contamination ( PL 7.1) and ( PL 7.2)
Damage to the Vacuum Transport Sensor/s ( PL 7.2)