[jjwind]

作者: 让一切随风

这个代码大都不准 我以为发上来了 看了下 少一张图片 代码是361.376.00 说的好像是蓝色粉吧 基本排除硬件问题引起的错误了

看代码好像是说蓝色激光器的故障，另外根据维修手册，要先看看除了361-376之外，有没有连接错误的故障提示，如果有就先排除接触不亮，如果没有，更换激光器。当然，我英文不好，我看手册大概是这个意思。

你去动下粉干嘛捏

我觉得代码大多都说准的……不过楼主说错误7之后导致的，那还挺难说的。


维修手册原文如下：
361-376 LPH Chip Fault C
BSD-ON:BSD 6.10 LPH Control (C)
Open circuit detected in LPH Unit (C) (open circuit between DELSOL and SLED).
NOTE: •Because this Fail is detected for each color at every cycle-up, perform at least four
jobs after turning the power OFF and ON.
• When turning the power OFF, turn OFF the Power Switch first and then the Main Power
Switch.
Procedure
Enter DC122 Fail History. Check whether any Fail related to connection failure of the Flat
Cable between the MCU PWB J555 and the LPH Rear PWB (C) J559 has occurred.
Has any Chain No. 361 Fail (other than LPH Chip Fail) occurred?
Y N
Replace the LPH Unit (C) (PL 2.1).
Go to the appropriate RAP