[jdhyp]

请各位大侠帮忙,谢谢了

1. 喷墨制版用的是什么软件?是方正pspnt还是别的rip?

2. 怎样才能让喷墨打印机跟输出软件接上?win插件里不能分色,需要用什么驱动程序吗?

3. 如何提高喷墨打印的速度?

4. 喷墨打印机如何改装,除了换墨水还得改哪些?

请多多指教

[sunboss]

是喷到胶片上啊，还是喷到特殊版材上啊

[guolingho]

现在喷墨制版的效果到底怎样啊，可以做什么啊！有没有稳定的机器呢
能够解决套准的问题不？

[lijianye198153]

本身喷墨软件现在就很多 但是真正控制墨量的软件并不是很多 现在我们的软件已经可以很好的做到 并且与国内外所有的RIP软件完全结合使用

[xxyyzz97]

The first inkjet print on PET film for plate making by Kimoto (Japan) in 1997. From that time major market for this product is screen printing.
Currently, G&J, Xante, Technova, Compose System, etc offering this kind of product.
The RIP used by these companies are Harlequin, JAWS, Wasatchi.
They are using different types of plate, such as PS plate with coating, naked aluminum plate. Ink used also having different types, original Epson ink, sublimation ink, own propriety ink. Some of them also allow their inkjet to print in clear film to replace imagesetter film.
All of them are using Epson plotter, from C4880, C7880 to C9880 engine. Using sublimation ink and own propriety ink need to modify the plotter to suit the ink characteristic.
By using the aluminum plate, the plotter also need to apply. Because the original plotter is not design for carrying such heavy media, this will cause transport mechanism to wear out much faster than expected.
The Epson providing 2880 x 1440 dpi, you can get at higher as 300lpi. However, you have the trade off in output speed. Normally, the output resolution would be 1440 dpi. The highest screening should be around 150lpi. If the customer did not mind the minor morie then 175lpi would be OK.

[摩哲]

专用药水 专用版才，印刷彩色报纸类活没问题，简单单色书刊应该也成，成不很低，因为版才可以回收利用，只能用epson的打印机。可最高做到175线。展会上看到过印刷的报纸样张。要求不高的话过得去。。机器价格也低。。。