[871876562]

开机就出有时候重启没事，但是打不了多少就又报了，求大师解决

[balenofeng]

010-315 Fuser Latch Contact Fail
Bsd-on:CH9.14, CH10.2

Nip Sensor does not turn ON a spec time after the Latch On signal is sent.

When Fuser Exit Sensor is turned On then Off during printing, Fuser Nip Sensor is Off.

[balenofeng]

按照你目前的情况分析，我建议检查一下Fuser Nip Clutch(定影离合器)，最好是更换！！！

[871876562]

额。。有时候定影离合器是能修好，但是大部分还是不行，昨天修了，已经不出了，谢了。

[jickysky99]

哦 门开关也有可能