[r3voluti0]

ColorLogic released few months ago a new version 8 of ColorAnt, but something strange occurs at some cases.
All people can do this test
Environment of test :
- ColorAnt 7.x
- ColorAnt 8.x (8.0 / 8.0.1 / 8.0.2 / 8.0.3)
- Reference file : P2P51 (i1Pro-i1iO).txt


License don't needed (just install and do tests)
----
1. Load reference file: P2P51 (i1Pro-i1iO).txt
2. Go Export Chart option and try to make good TIFF file


Here results :

LEFT: v7.x || RIGHT: v8.x

ColorAnt_V0cw3wr3lK.jpgColorAnt_9r8nNyjphG.jpg

ColorAnt v7 reads txt ref file correctly.
ColorAnt v8 ? .... you can try to play and post your comments for sure



Installers if you don't have it:
ColorAnt-7.0.2-win.rar
ColorAnt-8.0.3-win.rar

[realaqu]

作者: r3voluti0

ColorLogic released few months ago a new version 8 of ColorAnt, but something strange occurs at some cases.
All people can do this test
Environment of test :
- ColorAnt 7.x
- ColorAnt 8.x (8.0 / 8.0.1 / 8.0.2 / 8.0.3)
- Reference file : 465255


License don't needed (just install and do tests)
----
...

switch width and length and try again

[pizzaboy40]

When I try it.
In Copra 8 I need to modify path width to 8mm, the format can be correct.

[realaqu]

作者: pizzaboy40

When I try it.
In Copra 8 I need to modify path width to 8mm, the format can be correct.

我叫他互换一下长和宽是p2p里一行定义25个patch, 加上gap, 265mm的宽度就不够了, 必定有soft wrap, 换一下长边就好了, 用文本打开那个p2p就看见了， 大概7里有判断长超过限度就rotate90度的设定

[pizzaboy40]

Colorant 8 從推出以來的版號 一值都有問題
尤其是剛開始的8.01~8.02
這段時間甚至連讀取 cxf 格式都有判斷錯誤問題
8.03 才終於修正

自己多是用自建導表
反而沒注意這種規格化的導表 實際上也有bug

作者: realaqu

我叫他互换一下长和宽是p2p里一行定义25个patch, 加上gap, 265mm的宽度就不够了, 必定有soft wrap, 换一下长边就好了, 用文本打开那个p2p就看见了， 大概7里有判断长超过限度就rotate90度的设定