[flexolutions]

try FAG Flex3 Pro

[flexolutions]

High power magnifying glass only tells you how the dot look like, as view by eye and calculate the dot size is not stable, if can be different form people to people, does not tell you the percentage of the dot AM and FM. Also Flex3pro can give you the ability to view plate in 3D mode, you can see the shoulder of the dot, to confirm fail or pass. If you are user of digital plate, you can also make measurement of the LAM layer. make report and sent dot gain cure to CTP and CTF system.

To tell which system is good or bad, most important is the software (calculation of dot size), how easy to use, seeing is believing, we have demo unit, so we can bring it to your factory to test it out, see it and use before you make a decision of buy which tools. You can contact me at joe@flexolutions.com.hk

高功率放大镜只是告诉你纲点如何，用肉眼查看外观和计算点的大小并不稳定，人对人是有差距，不能告诉你调幅点和调频点的百分比。 Flex3pro可以给你的能力，在3D模式下查看点，你可以看到点的肩膀，以确认失败或通过。如果您是数字版的用户，也可以使测量LAM层。报告CTP和CTF系统发送。

要告诉这是好还是坏，最重要的系统软件(点大小计算)，易于使用，眼见为实，我们已演示糸统，所以我们可以把它到你的工厂，以对其进行测试，看它使用，请决定购买哪些工具。您可以在joe@flexolutions.com.hk联系我