012-250 End Guide Motor 1 Start Fail
Bsd-on:CH15.19
When the End Guide is moving away from the home position, the End Guide Home Sensor 1 does not turn OFF within the specified time after the End Guide Motor 1 On.
Procedure
Enter the Diag Mode, input DC330[013-121] (End Guide Home Sensor 1) and turn it ON. Turn the sensor ON and OFF with a sheet of paper.
Does the display switch between ’H’ and ’L’?
Yes No
Go to 2.2.3.2 Permeable Sensor Failure FIP and fix the End Guide Home Sensor 1.
Press the Stop button.
Input either DC330[013-029] (Up) or [013-030] (Down) (End Guide Motor 1) and...