[jgcopy2008]

010-321 Fusing Unit Nip Fail
Bsd-on:CH10.1

Nip or Release operation error of the Fusing Unit was detected.


This Fail is a Sub System failure and its occurrence cuts off the +24VDC_C13. (Refer to BSD CH1.7)

Cause/Action
Check the following:

The Fusing Unit Nip Sensor (DC330 [010-203]) for operation failure. (PL 7.6)

The Sensor Actuator for damage. (PL 7.6)

The Gear of retract mechanism for wear and damage.

The One Way Clutch for skidding.

The Drawer Connector ( DP612/ DJ612) for poor contact.


If no problem is found, replace the MCU PWB. (PL 18.2)

010-321 Fusing Unit Nip Fail
Bsd-on:CH10.1
Nip or Release operation error of the Fusing Unit was detected.
This Fail is a Sub System failure and its occurrence cuts off the +24VDC_C13. (Refer to BSD CH1.7)
Cause/Action
Check the following:
The Fusing Unit Nip Sensor (DC330 [010-203]) for operation failure. (PL 7.6)
The Sensor Actuator for damage. (PL 7.6)
The Gear of retract mechanism for wear and damage.
The One Way Clutch for skidding.
The Drawer Connector ( DP612/ DJ612) for poor contact.
If no problem is found, replace the MCU PWB. (PL 18.2)