[liu494525777]

施乐4110卡纸代码077-909请大家帮帮解决一下


卡在这对位，还没进对位辊，纸就折了

谢谢

[修施乐的海贼]

这个定位的磨损有些严重啊
如果纸张会折角的话那么肯定是进纸的时候有问题了
检查下手送或者纸路搓纸组件？
是手送进纸 还是纸盘进纸
楼主也没说哇

[liu494525777]

海贼哥， 4110无论从哪个纸盒进纸都一样！~~之前卡过纸张，清过碎纸

[修施乐的海贼]

。。。。
这是8可能的
那机器不是都报废了么
机器哪里买的 找他们去
卡个纸把机器卡成这样了
还是仔细检查下 像你说的会折角
肯定是有那么挡住了

[liu494525777]

海贼哥，没有折纸，是整张纸都对折了，对位辊不转(转了0.001秒吧)

[liu494525777]

一到对位就停止

[ncjingxi]

有纸路没有清干净嫌疑，未必是对位辊不转！

[修施乐的海贼]

从代码解释来看
有些太笼统了
不过既然是卡纸引起的问题
自然还是先排除和确认没有残余的碎纸片为首要的

[zhangxs199]

这问题是有东西带不动吧 检察下输送皮带马达

[liu494525777]

继续补充之前的图片

[liu494525777]

只是我把对位组件整套都清过了

[liu494525777]

假设是对位辊不转要如何测试呢？

[balenofeng]

077-909 IOT Static Jam
BSD on:CH3.1
Description
At Power ON or with Interlock closed, one of the sensors of IOT sensed paper.

Check Items
Check NVM[742-003](IOT Jam Sensor Chain No.) and NVM[742-004](IOT Jam Sensor Link No.) to identify which sensor has caused IOT Static Jam.

E.g.: If the current value in NVM[742-003] is [77] and the current value in NVM[742-004] is [108], it indicates the cause is DC330[077-108]=IOT Exit Sensor. Turning OFF the power clears the values in NVM[742-003] and NVM[742-004]. The suspected sensors are as follows:

[071-100] Tray 1 Pre Feed Sensor

[072-100] Tray 2 Pre Feed Sensor

[073-100] Tray 3 Pre Feed Sensor

[074-100] Tray 4 Pre Feed Sensor

[010-201] Fuser Exit Sensor

[077-105] Invert In Sensor

[077-106] Invert Path Sensor

[077-100] Trans Path Sensor 1

[077-101] Trans Path Sensor 2

[071-101] Feed Out Sensor 1

[072-101] Feed Out Sensor 2

[073-101] Feed Out Sensor 3

[074-101] Feed Out Sensor 4

[077-103] Pre Regi Sensor

[077-104] Regi Sensor

[077-107] Invert Out Sensor

[077-108] IOT Exit Sensor

[077-109] Dup In Sensor

[077-110] Dup Path Sensor 1

[077-111] Dup Path Sensor 2

[077-112] Dup Out Sensor

[075-100] MSI Pre Feed Sensor

[075-101] MSI Feed Out Sensor

Check the machine inside for pieces of paper.

Signal line from the sensor for a short to the frame

Check if the Sensor actuator improperly returns.

Sensor for light from outside

Check for a drop in the power voltage to the sensor.

[balenofeng]

××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××


077-909静态卡纸，可能是纸路上有残留的纸屑，或者某个传感器有故障了，按照上面应该可以解决的
另外纸张大小与设定不符好像也会引起卡纸的，但是不是这个代码我就不记得了

[liu494525777]

我先试试吧。。。一张卡纸就导致这么大的问题 先感谢各位！