[584206674]

如图，漏粉，柯美6500这样情况是不是载体不行了？

[Topstep1]

On the 6500 there is a Toner Filter, that is suppose to help with remove excess toner. The gaskets look pretty good. So that's not the problem.

It is a very good idea to try and vaccum and wipe around the inside of your Machine. There is always going to be some Toner around. But keeping it managed is a very good thing. And helps with Preventative Maintenance. (Not having to call the Technician so much).

When you are wiping be careful. There are very little springs that can come loose and cause a code. Wipe but be gentle.

This will also help you to see what your Machine is doing. So you can stay on top of it.

[jgcopy2008]

不一定，有时候充电有问题也会这样，先检查充电吧。

[584206674]

电极丝换过了，自己绑了一根。主要是下图，粉仓往外漏粉。

[584206674]

作者: Topstep1

On the 6500 there is a Toner Filter, that is suppose to help with remove excess toner. The gaskets look pretty good. So that's not the problem.

It is a very good idea to try and vaccum and wipe around the inside of your Machine. There is always going to be some Toner around. But keeping it managed ...

本论坛叫《中文印刷社区》，如果是中国人，请说中文。

[缘佡]

擦干净吧鼓对换一下，看看是不是鼓会漏电，也有可能是显影仓会漂粉

[复印机浩哥]

如果你用的粉没问题的话
载体的可能性非常大
建议换掉
不然粉有一半跑废粉桶了
你还要天天做清洁……