[xes_zjl]

14-368 ROS CONNECT FAIL
BSD on: CH6.6A
Description
An error was detected in the harness between the ROS and the Half Tone PWB.
Procedure
Pull out and insert the harness between the ROS and Half Tone PWB. Check that the harness is connected correctly using the check procedures described in the Installation Procedures of REP 4.1.1.
Replace the following parts:
Flat Cable (PL 4.1)
ROS Assembly (PL 4.1)

Half Tone PWB (PL 9.2)

[xes_zjl]

请问各位，两个问题。第一，DC1255，用什么样的代用硅油，硅油的粘度是多少？第二，显示清洁纸需要更换，更换代用的清洁纸芯后，机器仍然显示要更换，信息不清除，能否关闭这个显示。