求助：施乐DC5000代码6-363是什么意思如何解决

**修施乐的海贼** · 2012-05-28, 13:49

一说到问题卖机器的卖耗材的就不见人了
一说到耗材机器的买卖出来现身的倒不少

6-363 Sub Driver Fuse Fail

应该是站在机器后面的话靠机器左侧的一块小板有问题
检查保险和线路先

还有是在正常使用的情况出的吗？

**修施乐的海贼** · 2012-05-28, 13:51

6-363 Sub Driver Fuse Fail
Description
Sub Driver PWB Fuse Fail.

Procedure
Go to LVPS 3 +24 VDC Wirenet (1 of 5) and LVPS 3 +24 RTN Wirenet (1 of 3), check Fuse F2 and Fuse F3 on the Sub Driver PWB and Fuse F10 on the Distribution 1 PWB for an open.

The Fuses are Ok.
Yes No Unanswered

Replace the Fuse ( PL 13.3)

+24 VDC is measured between J690-5 and J690-6 on the Sub Driver PWB.
Yes No Unanswered

+24 VDC is measured between J690-7 and GND on the Sub Driver PWB.
Yes No Unanswered

Go to the LVPS 3 +24 VDC RAP.

Replace the Sub Driver PWB ( PL 13.2).

Perform the following:

Replace the Sub Driver PWB ( PL 13.2).

Replace the IO PWB ( PL 13.3).

**修施乐的海贼** · 2012-05-28, 15:35

机器关机3到5分钟后
再次开启一样的吗？
那就要排查线路和保险了

**修施乐的海贼** · 2012-05-28, 15:55

是那种狠小个头的小电阻
你可以拆下来看看先
目测下

**修施乐的海贼** · 2012-05-28, 15:59

3-317 无所谓的
是因为你没关闭UI就重启机器了
所以有些通信延迟
主要还是6-363 的

**修施乐的海贼** · 2012-05-28, 16:00

3-317 UI to System Communications Fail RAP

**修施乐的海贼** · 2012-05-28, 16:09

确定以后可以拿到维修电视机或者电路板的地方让他们试试
同样规格的可以搞上去试试的

**修施乐的海贼** · 2012-05-28, 16:34

别光说谢谢嘛点下感谢啦俺现在199 就差一个就到200啦

Menu