| 论坛帮助 |
| 日历事件 |
2012-08-20, 00:02
|
#1 | ||
|
|||
|
正式会员
等级: 一袋长老
|
首先mac電腦10.6版 居然都裝不起來 連原廠光碟 官方 ... 連mac工程師都說 驅動問題 有找 10.4 ~ 10.7版都不行 有灌起來 可是資料無法傳達 (WINDOS可以) 再來就是 容易J2101 紙張會卡滾筒分離爪 溫度降-10度後 有改善 可是色紙還是會jam 有無神手 能解決這兩問題 |
||
|
|
2012-08-20, 00:04
|
只看该作者 #2 | ||
|
|||
|
正式会员
等级: 一袋长老
|
No J1 Category: Jam Date of issue: September, 2010 Go to INDEX J-2101 [Symptom] Drum wrapping jam occurs when using specific paper. [Cause] Transfer value and transfer timing is inappropriate. [Solution] Change the transfer current value in the MICHINE screen as follows. (Transfer leading edge1, 2 only) [Tray Setting]-[Change Set]-[Process Adj.]-[Transfer Offset Adj.] Step1 Increase offset value at leading edge1. (by 10 step) *: When belt separation and leading edge image quality were deteriorated, decrease the value. Step2 (If Step1 is not effective) Decrease the value of the leading edge1 and 2. *: When the transfer fails at the leading edge section, increase the value. Then, register the name of the paper. (Can be register up to 100) Others The symptom occurs at the burr of paper cutting area too. Turn around and feed the transfer paper. When jam does not occur, change paper setting direction so that the paper cutting area of the jam becomes the tailing edge of paper cutting area. Transfer value off set is the direction that the minus direction is improved. Caution Never perform the transfer current adjustment in service mode. 這好像似官方解決的方法 可是英文看不懂 有人能翻譯的嗎 |
||
|
|
|
2012-08-20, 09:57
|
只看该作者 #4 | |||
|
||||
|
正嘉数码●施乐正品
等级: 八袋长老
|
俺琢得对于全新机厂商来说 都是小事
__________________
声 明 如 下： 海贼唯一Q号:1300298000[V信同号]，Q群:116774； TEL:15565218000 [V信同号]; [抖音号:zenjusthaizei(V信同号)]; TaoBao:正品施乐耗材旗舰店 ←请点击 1,我司专营富士2手设备耗材,及其他品牌(柯美,惠普,佳能等)各机型耗材配件; 2,修设备,做技术,俺靠一句话"人可以骗人,但是设备不会骗人." 3,认为本人技术分享有用的,请点击右下角“感谢”赞一个,或扫码下图微信打赏.谢谢。  |
|||
|
|
有無b1051 神人 幫幫我
